From ebb2ff2af569d5822b70ee555a32d27cf7494816 Mon Sep 17 00:00:00 2001 From: Jeff Armstrong Date: Sun, 25 Oct 2026 17:42:06 -0400 Subject: Initial import of 4.11 --- doc/cpkfet.msg | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 doc/cpkfet.msg (limited to 'doc/cpkfet.msg') diff --git a/doc/cpkfet.msg b/doc/cpkfet.msg new file mode 100644 index 0000000..97b3043 --- /dev/null +++ b/doc/cpkfet.msg @@ -0,0 +1,24 @@ +Date: 23 May 1986 0807-EDT +From: "Bernie AT&T:617-467-5664 LDP Workstations" +To: sy.fdc@cu20b +Subject: CP/M-80 Kermit Bootstrapping Procedure Corrected + +Here is a fixed version of the CP/M bootstrapping program. The version that +has been listed in the CP/M-80 Kermit manual for the past several years failed +to store the end of the file after downloading it into memory. The new version +stores in multiples of 2 sectors [256 bytes] and could have a 'overrun' of that +much, however without problems, since the Control-Z does the magic. Unlike the +previous version, this program displays the data on the screen while capturing +it into memory. + +Probably you want to include the 'program' - for the guy who has an editor AND +the DDT-form. I believe that the assembler will catch typos easier than DDT - +and not everybody is fluent enough in DDT to correct typos on the fly. + +The Rainbow was able to 'fetch' at 2400 baud, VT180 only checked at 1200 baud. +You might want to check on your micros, first thing to go [speed-wise] could be +the 'visual' display - although I NEEDED to see the 'bytes' trickling in - and +its also quite handy to see a 'blotch' coming on the VT180 - so you know right +away when a transfer wasn't clean. + +- Bernie -- cgit v1.2.3