Initial import of 4.11HEADmain

1 files changed, 440 insertions, 0 deletions

diff --git a/src/cpxgni.asm b/src/cpxgni.asm
new file mode 100644
index 0000000..615103f
--- /dev/null
+++ b/src/cpxgni.asm
@@ -0,0 +1,440 @@
+; CPXGNI.ASM
+;       KERMIT - (Celtic for "FREE")
+;
+;       This is the CP/M-80 implementation of the Columbia University
+;       KERMIT file transfer protocol.
+;
+;       Version 4.0
+;
+;       Copyright June 1981,1982,1983,1984,1985
+;       Columbia University
+;
+; Originally written by Bill Catchings of the Columbia University Center for
+; Computing Activities, 612 W. 115th St., New York, NY 10025.
+;
+; Contributions by Frank da Cruz, Daphne Tzoar, Bernie Eiben,
+; Bruce Tanner, Nick Bush, Greg Small, Kimmo Laaksonen, Jeff Damens, and many
+; others.
+;
+;       This file contains the system-dependent code and data for various
+;       Genie 3  CPM kermit 
+;
+; This has the Family name of CPXGNI.ASM.
+;
+; revision history (last edit first)
+; edit 3: 27 October, a987 by OBSchou.  Massaged file to suit V4.09 structure.
+;
+; Edit 2: Aug 27 1987 GDS Put in code for BREAK and fillited out
+;         a lot of unnecessary IF's
+;
+;Edit 1: Nov. 28, 1986 Geof Smith Clinical Research centre Harrow UK.
+
+.printx * Assembling for Eaca Genie 3 *
+;
+drtime  EQU     05H     ;Default receive time out interval.
+;
+; the basics...
+;
+mnport EQU 0E8H
+mnprts EQU 0EDH
+output EQU 20H
+input  EQU 01H
+lctrl  EQU 0EBH
+divlsb EQU 0E8H
+divmsb EQU 0E9H
+z80    EQU TRUE
+brkval EQU 40H
+
+defesc EQU ']'-100O ;The default escape character.
+
+
+;Select initial setting for VT-52 emulation flag.
+
+; default to VT52-EMULATION ON.
+;
+vtval   EQU     1
+;
+;
+
+;	Family is the string used in VERSION to say which of several 
+;       smaller overlay files are used.  These are (will be) derived from 
+;       the huge CP4SYS.ASM file, in which case we will never get here.  
+;       Just a Dollar, but put a sting in for a family of machines.
+;
+family:db      'CPXGNI.ASM  (3)  27-Oct-87$'    ; Used for family versions....
+
+
+
+;
+;       System-dependent initialization
+;       Called once at program start.
+sysxin:
+;
+			;Set up 9600 bd, 8bit words, no parity 1stop bit
+
+	mvi	a,83H		;enable DLAB by setting bit 7
+	out	lctrl   	;and outputting to control port
+	mvi	a,14H		;get word = 20 decimal
+	out	divlsb		;and put it out
+	mvi	a,00H		;as two separate
+	out	divmsb		;bytes
+	lda	pstore		;get parity etc
+	out	lctrl		;do it resetting DLAB at same time
+
+	ret			; return from system-dependent routine
+
+
+;
+;       system-dependent termination processing
+;       If we've changed anything, this is our last chance to put it back.
+sysexit:
+
+        ret
+
+;
+;       system-dependent processing for start of CONNECT command
+;
+syscon:
+        ret
+
+conmsg:         ; Messages printed when entering transparent (CONNECT) mode:
+;
+
+
+;
+;       syscls - system-dependent close routine
+;       called when exiting transparent session.
+;
+syscls:
+       ret
+;
+
+
+;
+;       sysinh - help for system-dependent special functions.
+;       called in response to <escape>?, after listing all the
+;       system-independent escape sequences.
+;
+sysinh:
+        lxi     d,inhlps        ; we got options...
+        call    prtstr          ; print them.
+        ret
+
+
+;additional, system-dependent help for transparent mode
+; (two-character escape sequences)
+inhlps:
+
+        db      cr,lf,'B  Transmit a BREAK'
+
+        db      '$'                     ;[hh] table terminator
+
+;
+;       sysint - system dependent special functions
+;       called when transparent escape character has been typed;
+;       the second character of the sequence is in A (and in B).
+;       returns:
+;       non-skip: sequence has been processed
+;       skip:   sequence was not recognized
+sysint: ani     137O            ; convert lower case to upper, for testing...
+        cpi     'B'             ; send break?
+        jz      sendbr          ; yes, go do it.  return nonskip when through.
+
+        jmp     rskp            ; take skip return - command not recognized.
+
+
+;-------------------------------------------------------------------------------
+sendbr:
+;
+;       Ensure that the transmitter has finished sending buffered chars
+sndbr1: in      mnprts          ; get UART status
+        ani     output         ; everything sent?
+        jz      sndbr1          ; no, wait a bit more
+;
+;       Begin sending a break by setting bit in UART command register
+        mvi     a,brkval           ;  SBreak, 
+        out     lctrl
+;
+;       Wait for 250 milliseconds (using hundredths second delay routine)
+        mvi     a,25
+        call    delay
+;
+;       Resume normal operation by clearing the SendBreak command bit
+        lda pstore                  ;and restoring value from parity store
+        out mnprts
+;
+        ret                     ;done
+
+;
+;
+
+;
+;       sysflt - system-dependent filter
+;       called with character in E.
+;       if this character should not be printed, return with A = zero.
+;       preserves bc, de, hl.
+;       note: <xon>,<xoff>,<del>, and <nul> are always discarded.
+sysflt:
+        mov     a,e             ; get character for testing
+        ret
+
+;       mdmflt - modem filter [30]
+;       called with character to be sent to modem in E
+;       with parity set as appropriate.
+;       return with accumulator = 0 do do nothing,
+;                               <> 0 to send char in E.
+mdmflt:	mov	a,e		; get character to a
+        ret
+
+
+
+;       prtflt - printer filter [30]
+;       called with character to be sent to printer in E
+;       returns with a = 0 to do nothing
+;                    a <> 0 to print it.
+;
+;       this routine for those printer that automatically insert
+;       a lf on cr, or cr for lf.  Should this be shifted to 
+;       the system indep. stuff, in say 4.06?
+prtflt:
+        mov     a,e             ; [30] get character to test
+        ret
+
+
+;
+
+
+;
+; system-dependent processing for BYE command.
+;  for apmmdm, heath, and lobo, hang up the phone.
+sysbye:
+        ret
+;
+
+
+;       This is the system-dependent command to change the baud rate.
+;       DE contains the two-byte value from the baud rate table; this
+;       value is also stored in 'speed'.
+sysspd:
+
+			;Set up baud rate 8bit words, no parity 1stop bit
+     mvi a,83H     ;enable DLAB by setting bit 7
+     out lctrl     ;and outputting to control port
+     mov a,d         ;get LSB
+     out divlsb     ;and put it out
+     mov a,e       ;get MSB
+     out divmsb     ;output it as well
+     lda pstore     ;get parity etc
+     out lctrl     ;do it resetting DLAB at same time
+     ret
+
+pstore:     db 03H  ;Default value for parity word length and stop bits
+
+spdtbl: db    11h               ;17 entries
+     db     03h,'110$',     06H,0D1H
+     db     04h,'1200$',     00H,0A0H
+     db     05h,'134.5$',     05H,94H
+     db     03h,'150$',     05H,00H
+     db     04h,'1800$',     00H,6BH
+     db     05h,'19200$',     00H,0AH
+     db     04h,'2000$',     00H,60H
+     db     04h,'2400$',     00H,50H
+     db     03h,'300$',     02H,80H
+     db     04h,'3600$',     00H,35H
+     db     05h,'38400$',    00H,05H
+     db     04h,'4800$',     00H,28H
+     db     02h,'50$',     0FH,00H
+     db     03h,'600$',     01H,40H
+     db     04h,'7200$',     00H,1BH
+     db     02h,'75$',     0AH,00H
+     db     04h,'9600$',     00H,14H
+
+sphtbl: db     cr,lf,'   50      75    110    134.5  150    300    600   1200'
+     db     cr,lf,' 1800   2000   2400   3600   4800   7200   9600  19200  38400$'
+
+;       This is the system-dependent SET PORT command.
+;       HL contains the argument from the command table.
+sysprt:
+
+        ret
+;
+prttbl  equ     0               ; SET PORT not supported
+prhtbl  equ     0
+
+;
+
+;
+;       selmdm - select modem port
+;       selcon - select console port
+;       selmdm is called before using inpmdm or outmdm;
+;       selcon is called before using inpcon or outcon.
+;       For iobyt systems, diddle the I/O byte to select console or comm port;
+;       For Decision I, switches Multi I/O board to console or modem serial
+;       port.  [Toad Hall]
+;       For the rest, does nothing.
+;       preserves bc, de, hl.
+selmdm:
+        ret
+
+selcon:
+        ret
+;
+
+
+;       Get character from console, or return zero.
+;       result is returned in A.  destroys bc, de, hl.
+;
+inpcon:
+        mvi     c,dconio        ;Direct console I/O BDOS call.
+        mvi     e,0FFH          ;Input.
+        call    BDOS
+
+        ret
+;
+;       Output character in E to the console.
+;       destroys bc, de, hl
+;
+outcon:
+
+        mvi     c,dconio        ;Console output bdos call.
+        call    bdos            ;Output the char to the console.
+
+        ret
+;
+;
+;       outmdm - output a char from E to the modem.
+;               the parity bit has been set as necessary.
+;       returns nonskip; bc, de, hl preserved.
+outmdm:
+
+        in      mnprts          ;Get the output done flag.
+        ani     output          ;Is it set?
+        jz      outmdm          ;If not, loop until it is.
+        mov     a,e
+        out     mnport          ;Output it.
+        ret
+
+;--------------------------------------------------------------------------
+;
+;       get character from modem; return zero if none available.
+;       for IOBYT systems, the modem port has already been selected.
+;       destroys bc, de, hl.
+inpmdm:
+;Note: modem port should already be selected for mdI.  [Toad Hall]
+        in      mnprts          ;Get the port status into A.
+        ani     input           ;See if the input ready bit is on.
+        rz                      ;If not then return.
+        in      mnport          ;If so, get the char.
+        ret                     ; return with character in A
+
+
+;
+;       flsmdm - flush comm line.
+;       Modem is selected.
+;       Currently, just gets characters until none are available.
+
+flsmdm: call    inpmdm          ; Try to get a character
+        ora     a               ; Got one?
+        jnz     flsmdm          ; If so, try for another
+        ret                     ; Receiver is drained.  Return.
+;-----------------------------------------------------------------------------
+;
+;       lptstat - get the printer status. Return a=0 if ok, or 0ffh if not.
+lptstat:
+        xra     a               ; assume it is ok.. this may not be necessary
+        ret
+
+;
+;       outlpt - output character in E to printer
+;       console is selected.
+;       preserves de.
+outlpt:
+        push    d               ; save DE in either case
+        call    prtflt          ; go through printer filter [30]
+        ana     a               ; if A = 0 do nothing,
+        jz      outlp1          ; [30] if a=0 do nothing
+
+        mvi     c,lstout
+        call    bdos            ;Char to printer
+outlp1: pop     d               ; restore saved register pair
+        ret
+;------------------------------------------------------------------------------
+;
+;       Screen manipulation routines
+;       csrpos - move to row B, column C
+;
+;       csrpos for terminals that use a leadin sequence followed
+;        by (row + 31.) and (column + 31.)
+;
+csrpos: push    b               ; save coordinates
+        lxi     d,curldn        ; get cursor leadin sequence
+        call    prtstr          ; print it
+        pop     h               ; restore coordinates
+        mov     a,h             ; get row
+        adi     (' '-1)         ; space is row one
+        mov     e,a
+        push    h
+        call    outcon          ; output row
+        pop     h
+        mov     a,l             ; get column
+        adi     (' '-1)         ; space is column one
+        mov     e,a
+        jmp     outcon          ; output it and return
+
+;
+; delchr - make delete look like a backspace.  Unless delete is a printing
+;       character, we just need to print a backspace. (we'll output clrspc
+;       afterwards)
+;       For Kaypro and Vector General, delete puts a blotch on the screen.
+;       For Apple and Osborne 1, delete moves but doesn't print.
+delchr:
+
+        mvi     e,bs            ;get a backspace
+        jmp     outcon
+
+; erase the character at the current cursor position
+clrspc: mvi     e,' '
+        call    outcon
+        mvi     e,bs            ;get a backspace
+        jmp     outcon
+
+; erase the current line
+clrlin: lxi     d,eralin
+        jmp     prtstr
+
+; erase the whole screen, and go home. preserves b (but not c)
+clrtop: lxi     d,erascr
+        jmp     prtstr
+
+;[2] I see no real saving in having all screens in separate file and
+;therefore have included screen definition here and commented out
+;the link to VDU file
+;
+;Specific definitions for the Genie III screen
+;
+sysver: db 'Eaca Genie III$'
+outlin: db 1aH,cr,lf,'            $'
+erascr: db 1AH,'$'
+eralin: db cr,18H,'$'
+curldn: db esc,'=$'
+ttab:
+ta:     db 0BH,'$',0,0                    ;Cursor up
+tb:     db 0AH,'$',0,0                    ;Cursor down
+tc:     db 0CH,'$',0,0                    ;Cursor right
+td:     db 08H,'$',0,0                    ;Cursor left
+te:     db 1AH,'$',0,0                    ;Clear display
+tf:     db esc,'R$',0                    ;Reverse on
+tg:     db esc,'S$',0                    ;Reverse off
+th:     db 1EH,'$',0,0                    ;Cursor home
+ti:     db 0BH,'$',0,0                    ;Reverse linefeed
+tj:     db 19H,'$',0,0                    ;Clear to end of screen
+tk:     db 18H,'$',0,0                    ;Clear to end of line
+
+ovlend equ $           ;End of overlay
+
+END
+
+
+
+
+